The 16” IVP 250 from Hydra-Stop is the next generation of permanent, insertable gate valves offering increased strength, improved performance, and simplified installation and operation.
The TM-H6000 multifunction printer with ProofPlus ID scanning combines high-speed, two-color receipt printing and superior slip handling with a fast and powerful ProofPlus ID scanner. It is the only printer with an integrated check and ID scanner that allows retailers and supermarkets to implement ECC, capturing check and ID images at the point-of-sale to lower check costs and reduce fraud and liability.
Pre-packed, ready-to-use ProcessReady columns are designed for easy scale-up and cost-effective bioprocessing for Phase I and Phase II clinical trial material. ProcessReady columns are made completely of polymeric materials and are designed for use in single-use production workflows. They are available in 3 sizes, with a fixed bed height of 20 cm to ensure optimum residence time, flow and capacity.
SCHOTT Electronic Packaging offers the HermeS® glass substrate wafer with hermetically sealed solid “Through Glass Vias” (TGV) designed to enable fully gastight and long-term robust enclosures for MEMS devices such as industrial hermetic MEMS sensors, medical MEMS, and RF MEMS. It features fine-pitched vias that allow for reliable conduction of electrical signals and power into and out of MEMS devices.
More efficiency. More reliability. More performance.
With our CR vertical inline multistage pump technology, we’ve delivered best-in-class reliability and efficiency for more than 45 years. But we never stop imagining ways to do even more. Introducing the new generation of CR pumps—three models (95, 125 and 155) with reimagined features and capabilities that move the limits of what’s possible.
The dB-3911 power-combined TWT Amplifier (TWTA) uses two wideband, periodic permanent magnet (PPM)-focused TWTs to amplify CW, AM, FM or pulse-modulated signals. Compared to a single TWT approach, the dB-3911 provides higher saturated output power and improved harmonic performance.
Dissolved Air Flotation (DAF) systems are designed to remove suspended solids (TSS), biochemical oxygen demand (BOD5), and oils and greases (O&G) from a wastewater stream. Contaminants are removed through the use of a dissolved air-in-water solution produced by injecting air under pressure into a recycle stream of clarified DAF effluent. This recycle stream is then combined and mixed with incoming wastewater in an internal contact chamber where the dissolved air comes out of solution in the form of micron-sized bubbles that attach to the contaminants. The bubbles and contaminants rise to the surface and form a floating bed of material that is removed by a surface skimmer into an internal hopper for further handling.
HUBER+SUHNER offers the SUCOFLEX® 118 microwave cable assemblies designed with improved and newly patented inner conductor construction. This cable assembly combines the low loss, VSWR, and CW power handling of the SUCOFLEX 106 with the phase stability and flexibility of SUCOFLEX 106 P.
Rosemount 550pH sensor is designed to provide high measurement stability for single-use bioprocessing applications. The sensor stability of <0.005 pH change per day enables users to do a one-point calibration at the start of the batch and operate for 30-days without any required maintenance or recalibration. The unique capability of being stored wet significantly increases shelf life to two years and allows immediate verification and calibration eliminating the initial stabilization process.
The Schreiber Bar Screen performs a complete job of removing screenings from the wastewater and placing them into a container for disposal. Using a rugged screen to remove large, potentially hazardous materials, the Bar Screen is the right tool for shallow-depth coarse screening.
|
|
|
|
|
|
|
|
|