Product/Service

OPTIMASS 7010 Coriolis Mass Flowmeter

OPTIMASS 7010

The OPTIMASS 7010 is a high-end single straight tube Coriolis mass flowmeter. It is particularly suitable for demanding process and dosing applications involving gases and shear-sensitive or viscous liquids, slurries, very aggressive media or media with a low flow velocity. The Coriolis meter features an integrated Modbus converter. This makes it the ideal solution for applications where a DCS or a PLC is already in use and extensive communication options and control functions are not necessary. By way of its Modbus interface the flowmeter integrates easily into existing controller systems. There is no need for a conventional signal converter. Purchase costs can be saved.

Request Information

The OPTIMASS 7010 is available in four sensor materials (titanium, stainless steel, Hastelloy®, tantalum). Due to its sensor design, there is virtually no pressure loss and the flowmeter is self-draining and easy to clean, which makes it also the perfect choice for hygienic applications. The Coriolis device is also approved for use in hazardous areas. It is additionally available with an EtherNet/IPTM Interface Box offering a full-featured web-interface for configuration, maintenance and diagnostics as well as smooth integration into major EtherNet/IPTM host systems.

Product highlights

  • Single straight tube design
  • No separate converter needed: Communication direct from meter
  • Integrated temperature measurement
  • Available in four sensor materials: titanium, stainless steel, Hastelloy® C or tantalum
  • With sensor size DN80 / 3" in titanium or Hastelloy® it is the largest single straight tube meter on the market
  • Optional PED approved secondary pressure containment up to 100 barg / 1450 psig
  • Virtually no pressure loss, easy to drain and clean
  • Many options (heat tracing, purge port etc.)
  • Immunity to crosstalk: resistant to installation and process effects
  • Optional EtherNet/IPTM web-interface for configuration, maintenance and diagnostics

Typical applications

General

  • Very aggressive, highly corrosive or shear-sensitive media
  • Products requiring a low flow velocity
  • Non-homogeneous mixtures
  • Slurries or products with entrained solids
  • Applications where a PLC or DCS is already used for other functions

Chemical and other process industries

  • Measurement of concentration, density
  • Bulk loading
  • Batching to reactors
  • Acids, bases, phosgene and other chloride substances, sulphuric substances

Food and beverage industry

  • Batching dosing, filling
  • Measurement of flow, density, specific gravity in brewing processes
  • Dosing of hop extract
  • Milk reception, dosing and separation processes in dairies
  • Measurement of Brix, density and flow in fruit juices
  • Oily and greasy products
  • Liquid chocolate, honey, marmalade, syrup etc.
  • CO2 injection
  • Whisky, wine, vodka etc.

Pharmaceutical industry

  • Batching, dosing, filling
  • Solvent extraction

Oil and gas industry

  • Metering skids, bulk and tanker loading, pipeline transfer, in-line density

Pulp and paper industry

  • Paperstock, pulp
  • Coating kitchens

Water and wastewater industry

  • Flocculant dosing
  • Sludge flow and density measurement

KROHNE, Inc.